Creative Engineered Solutions for Subsea Developments

Filters

L B Bentley designs and manufactures specialist bespoke filters. Each filter is specifically designed to meet customers' precise requirements.

High-Pressure Air Filters

They are constructed of carbon steel or stainless steel. The filter head can be unscrewed by hand and all filter parts can be renewed in minutes without the use of tools. All units can also be provided with manual drain valves.

They will remove moisture, oil, vapours, odours, carbon monoxide and other gaseous vapours and solid particulates commonly present in ordinary compressed air. The result is high quality, clean air suitable for breathing applications and conforming to BS 4275, BS 4001, BS EN 12021, OSHA and DIN 3188 standards.

Pre-Filters

Our pre-filters feature a mechanical 1 micron separator element to remove heavy condensates. The filter also has the ability to retain large quantities of solid particles without clogging.

Adsorption Filters

Depending on the application, Bentley adsorption filters can be supplied as a three, four or five stage systems and normally consist of a glass microfiber coalescer filter manufactured to remove liquid oil from the compressed air stream; with activated a carbon, desiccant and / or catalytic canister to remove water and hydrocarbon vapour and odours and / or to reduce carbon monoxide concentrations; and an in-line filter for final removal of dust particles.

Particulate Filters

Bentley’s particulate (dust) filters are fitted with elements of various grades to remove and prevent the carry over of dust or other particles to 0.01 micron and above. This makes them ideal as an after-filter for desiccant dryers or for applications where a high standard of filtration is required.

The filter element is constructed of pleated layers of glass fibres in an in-depth arrangement, which has the ability to accumulate large amounts of solid particles and resist clogging. This allows a gradual increase in pressure drop across the filter resulting in a long operational life.

Water / Oil Demister Filters

Bentley’s water / oil demister filters incorporate unique cartridges for silencing and separating water / oil mist from low- and high-pressure compressed air exhaust drainage points.

They remove 100% of water / oil mist particles from air being exhausted at pressures up to 6,500 PSIG (450 BAR.G) to atmosphere. They also eliminate water / oil mist and smoke within buildings and ensure a clean working atmosphere.

The filters can be installed inside or outside buildings, allow the use of compressed air drainage points where environmental regulations would not normally allow – especially new industrial estates and provide suitable collection points for waste disposal.

They have been designed for compressed air systems where it is necessary to silence, separate and collect all condensate and sludge discharge from air compressor inter-cooler stages, after cooler, air dryers, air receivers, filters and automatic drain traps. They are ideal for areas where cleanliness is important and where site water / oil condensate and sludge cannot be sent direct to drains or wasted over a floor area. Their special cartridges combine excellent liquid separation characteristics with fine filtration and a large capacity for containment of liquid condensate.

Bentley’s oil demister filter vessels are constructed of Carbon Steel and are available with either a large removable top lid to allow air to be exhausted direct to atmosphere, or a flanged pipeline unit with bottom swing bolt closure for applications where the exhaust has to be piped to a suitable discharge point.